Center for Composite Materials - University of Delaware

MEDE Posters

MEDE Home Consortium Committee MEDE Posters MEDE Publications 2012-2022 Highlights

 

2022 Research Posters

Poster Title Authors
Materials In Extreme Dynamic Environments (MEDE) Capstone: Maximum Penetration Resistance

Prof. John W. Gillespie, Jr. (UD_CCM), Dr. Daniel J. O’Brien (US-ARL)
Multi-Scale Modeling of Fiber-Matrix Interphase

Sanjib C. Chowdhury (UD_CCM), Timothy W. Sirk (US-ARL),
John W. Gillespie, Jr. (UD-CCM)
Meso-Mechanical Modeling of Canonical Perforation Experiments Christopher S. Meyer (UD/CCM, ARL), Bazle Z. (Gama) Haque (UD/CCM),
Daniel J. O’Brien (ARL), John W. Gillespie, Jr. (UD/CCM)
Micromechanical Modeling of Punch Shear and Punch Crush of Unidirectional S-2 Glass Composites Bazle Z. (Gama) Haque (UD-CCM), Molla A. Ali (UD-CCM), Daniel J. O’Brien (ARL),
John W. Gillespie, Jr. (UD-CCM)
Vapor Deposited Thin Silane Interphases and Capstone Panel Design Munetaka Kubota (UD-CCM), Sanjib C. Chowdhury (UD-CCM), Bazle Z. (Gama) Haque,
Joseph M. Deitzel (UD-CCM), John W. Gillespie, Jr. (UD-CCM),
Giuseppe R. Palmese (Drexel), Daniel J. O’Brien (ARL)
Development of Mg/Al/Si/O ReaxFF Interatomic Parameters and Mechanical Properties, Damage Analysis, and Surface Analysis of S-glass Fiber Jejoon Yeon (UD-CCM), Chaitanya Daksha (UD-CCM), Sanjib C. Chowdhury (UD-CCM), John W. Gillespie, Jr. (UD-CCM)
Rate Dependent Non-Linear Progressive Composite Damage Model (rdnlpCDM) UMAT41 Bazle Z. (Gama) Haque (UD-CCM), T. Zhang, M. Kleinberger, R. Beckery, Daniel O’Brien (ARL), John W. Gillespie, Jr. (UD-CCM)

2021 Research Posters

Poster Title Authors
Multi-Scale Modeling of Fiber-Matrix Interphase

Sanjib C. Chowdhury (UD_CCM), Timothy W. Sirk (US-ARL),
John W. Gillespie, Jr. (UD-CCM)
Meso-Mechanical Modeling of Canonical Perforation Experiments Christopher S. Meyer (UD/CCM, ARL), Bazle Z. (Gama) Haque (UD/CCM),
Daniel J. O’Brien (ARL), John W. Gillespie, Jr. (UD/CCM)
Micromechanical Modeling of Punch Crush of Unidirectional S2 Glass Composites Bazle Z. (Gama) Haque (UD-CCM), Molla A. Ali (UD-CCM), Daniel J. O’Brien (ARL),
John W. Gillespie, Jr. (UD-CCM)
Vapor Deposited Thin Silane Interphases and Capstone Panel Design Munetaka Kubota (UD-CCM), Sanjib C. Chowdhury (UD-CCM),
Joseph M. Deitzel (UD-CCM), John W. Gillespie, Jr. (UD-CCM),
Giuseppe R. Palmese (Drexel), Daniel J. O’Brien (ARL)
Development of Mg/Al/SI/O ReaxxFF Interatomic Parameters and Mechanical Properties Damage Analysis, and Surface Analysis of S-Glass Fiber Jejoon Yeon (UD-CCM), Sanjib C. Chowdhury (UD-CCM), John W. Gillespie, Jr. (UD-CCM)
Rate Dependent Non-Linear Progressive Composite Damage Model (rdnlpCDM) UMAT41 Bazle Z. (Gama) Haque (UD-CCM), T. Zhang, M. Kleinberger, R. Becker, S. Satapathy, Daniel O’Brien (ARL), John W. Gillespie, Jr. (UD-CCM)
MIcro-Mechanical FE Modeling of Tensile Failure of Unidirectional Composites Raja Ganesh (UD-CCM), Ahmad Abu-Obaid (UD-CCM), John W. Gillespie, Jr. (UD-CCM), Daniel O’Brien (ARL)

 

2020 Research Posters

Poster Title Authors
Molecular Modeling of Fiber-Matrix Interphase

Sanjib C. Chowdhury (UDel), Riley Prosser (UDel), and John W. Gillespie Jr. (UDel), Timothy W. Sirk (ARL)
Meso-Mechanical Modeling of Canonical Perforation Experiments Christopher S. Meyer (UD/CCM, ARL), Bazle Z. (Gama) Haque (UD/CCM), John W. Gillespie, Jr. (UD/CCM), Daniel J. O’Brien (ARL), Enoch Bonyi (MSU), Kadir Aslan (MSU)
Micro-Mechanical Modeling of Progressive Punch-Shear, Punch-Crush & Tensile Behavior of Unidirectional Composites Bazle Z. (Gama) Haque (Udel), Daniel J. O’Brien (ARL) and John W. Gillespie Jr. (Udel)
Silane Architecture Characterization and Scaling the Vapor Deposition Process Munetaka Kubota (Udel), Sanjib Chowdhury (Udel), Joseph M. Deitzel (Udel), John W. Gillespie Jr. (Udel), Giuseppe R. Palmese (Drexel), and Daniel J. O’Brien (ARL)
Parameterization of ReaxFF Potential of Al Si O Mg Interaction for S-glass Using Genetic-Algorithm Assisted Artificial Neural Network Jejoon Yeon (UDel), Sanjib C. Chowdhury (UDel), Chaitanya Daksha (UDel), Adri C. T. van Duin (Penn State), John W. Gillespie Jr. (UDel)
Systesis and Characterization of Fiber-Matix Interphase Munetaka Kubota (Udel), Sanjib Chowdhury (Udel), Joseph M. Deitzel (Udel), John W. Gillespie Jr. (Udel), Giuseppe R. Palmese (Drexel), and Daniel J. O’Brien (ARL)

 

2019 Research Posters

Poster Title Authors
Multi-Scale Modeling of Fiber-Matrix Interphase Sanjib C. Chowdhury (UDel), Riley Prosser (UDel, URAP), Matthew Cohen (Udel, URAP), Jejoon Yeon (Udel), John W. Gillespie Jr. (UDel) Timothy W. Sirk (ARL), Salman Zarrini (Drexel), Giuseppe Palmese (Drexel), Cameron F. Abrams (Drexel)
Micromechanical FE Modeling of Tensile Failure of Unidirectional Composites Experimental Routes Raja Ganesh (UDel), John W. Gillespie Jr. (UDel), Daniel J. O’Brien (ARL)
Meso-Mechanical Modeling of Canonical Perforation Experiments Christopher S. Meyer (UD/CCM, ARL), Bazle Z. (Gama) Haque (UD/CCM), John W. Gillespie, Jr. (UD/CCM), Daniel J. O’Brien (ARL),
Enoch Bonyi (MSU), Kadir Aslan (MSU) “
Micromechanical Modeling of Progressive Punch-Shear Bazle Z. (Gama) Haque (UDel), Isabel Catugas (UDel), Tam Nguyen (UDel), Molla A. Ali (UDel), Raja H. Ganesh (UDel), John W. Gillespie Jr. (UDel), Chian-Fong Yen (ARL), Daniel J. O’Brien (ARL)
Parameterization of ReaxFF Potential of Al Si O Mg interaction for S-glass using Genetic-Algorithm assisted Artificial Neural Network Jejoon Yeon (UDel), Chaitanya Daksha (UDel), Sanjib C. Chowdhury (UDel), Adri C. T. van Duin (Penn State), John W. Gillespie Jr. (UDel)

 

2018 Research Posters

Poster Title Authors
Atomistic Scale Simulation for the Inter-Diffusion of
Epoxy-Amine
Jejoon Yeon (UDel), Sanjib C. Chowdhury (UDel), Chaitanya M. Daksha (Udel), John W. Gillespie Jr. (UDel), Robert M. Elder (ARL), Timothy W. Sirk (ARL), Jian Gao (Drexel), Salman Zarrini(Drexel), Giuseppe Palmese (Drexel), Cameron F. Abrams (Drexel)
Meso-Mechanical Modeling of Canonical Perforation Christopher S. Meyer (UD/CCM, ARL), Bazle Z. (Gama) Haque (UD/CCM), John W. Gillespie, Jr. (UD/CCM), Daniel J. O’Brien (ARL), Enoch Bonyi (MSU), Kadir Aslan (MSU)
Micromechanical FE Modeling of Tensile Failure of Unidirectional Composites: Experimental Routes Raja Ganesh (UDel), Sean Kennedy (URAP-Intern, UDel), Samhit Dontamsetti (UDel), John W. Gillespie Jr. (UDel), Daniel J. O’Brien (ARL)
Micromechanical Modeling of Progressive Punch-Shear Bazle Z. (Gama) Haque (UDel), Molla A. Ali (UDel), Raja H. Ganesh (UDel), John W. Gillespie Jr. (UDel) Chian-Fong Yen (ARL), Daniel J. O’Brien (ARL)
Multi-Scale Modeling of Fiber-Matrix Interphase Sanjib C. Chowdhury (UDel), Jejoon Yeon (UDel), John W. Gillespie Jr. (UDel), Robert M. Elder (ARL), Timothy W. Sirk (ARL), Jian Gao (Drexel), Salman Zarrini (Drexel),
Giuseppe Palmese (Drexel), Cameron F. Abrams (Drexel)

 

2017 Research Posters

Poster Title Authors
High Rate Test Methods for Fiber-Matrix Interface Sandeep Tamrakar (UDel), Subramani Sockalingam (USC), Raja Ganesh (UDel), Sanjib Chowdhury (UDel), B.Z. Haque (UDel), John W. Gillespie Jr. (UDel),
Weinong Chen (Purdue), Giuseppe Palmese(Drexel)
Mapping “Defects” and Linking Failure Modes at Multiple Length Scales in UHMWPE Filaments Preston McDaniel, Joseph M. Deitzel, John W. Gillespie, Jr.(UD-CCM), Kenneth Strawhecker, Travis Bogetti(ARL), Jeff Staniszewski(SURVICE)
Meso-Mechanical Modeling of Canonical
Perforation Experiments
Christopher S. Meyer (UD/CCM, ARL), Bazle Z. (Gama) Haque (UD/CCM),
John W. Gillespie, Jr. (UD/CCM), Daniel J. O’Brien (ARL), Bradley D. Lawrence (ARL), Jennifer M. Sietins (ARL), Enoch Bonyi (MSU), Kadir Aslan (MSU)
Micromechanical FE Modeling of Tensile Failure of Unidirectional Composites Raja Ganesh (UDel), Subramani Sockalingam (USC), Bazle Z. (Gama) Haque (UDel),
John W. Gillespie Jr. (UDel), Daniel J. O’Brien (ARL), Travis Bogetti (ARL)
Micromechanical FE Modeling of Tensile Failure of Unidirectional Composites – Experimental Determination of Fiber Defect Distribution Raja Ganesh (UDel), Eric Henderson (UDel, URAP-Intern), Ryan Tocker (UDel),
Sanjib Chowdhury (UDel), John W. Gillespie Jr. (UDel),
Daniel J. O’Brien (ARL), Travis Bogetti (ARL)
Modeling Fibrillation as an Energy Absorbing Mechanism in the Transverse Compression Response of Fibers Jeffrey Staniszewski (SURVICE), Travis Bogetti (ARL) Collaborators: Jan Andzelm (ARL),
In-Chul Yeh (ARL), John Gillespie (UDel),
Sanjib Chowdhury (UDel), Subramani Sockalingam (USC)
Multi-Scale Modeling of Fiber-Matrix Interphase
(Fiber Modeling)
Sanjib C. Chowdhury (UDel), Ethan M. Wise (UDel), Jeffrey Frey (UDel), Raja Ganesh (UDel), John W. Gillespie Jr. (UDel)

 

2016 Research Posters

Poster Title Authors
Multi-Scale Modeling of Fiber-Matrix Interphase
(Epoxy & Sizing Modeling)
Sanjib C. Chowdhury (UDel), Munetaka Kubota (UDel), Bazle Z. Haque (UDel),
John W. Gillespie, Jr. (UDel), Robert M. Elder (ARL), Timothy W. Sirk (ARL),
Jan W. Andzelm (ARL)
Multi-Scale Modeling of Fiber-Matrix Interphase
(Glass Fiber Modeling)
Sanjib C. Chowdhury (UDel), Raja Ganesh (UDel), John W. Gillespie, Jr. (UDel)
Micromechanical Modeling of Progressive Punch-Shear Behavior of Unidirectional Composites Bazle Z. (Gama) Haque (UDel), Molla A. Ali (UDel), Raja H. Ganesh (UDel),
John W. Gillespie Jr. (UDel) Chian-Fong Yen (ARL), Daniel J. O’Brien (ARL)
Micromechanical FE Modeling of Tensile Failure of Unidirectional Composites Raja Ganesh (UDel), Subramani Sockalingam (USC), Bazle Z. (Gama) Haque (UDel),
John W. Gillespie Jr. (UDel)
Relating Meso/Nano-Scale Structure to Mechanical Properties and Failure Mechanisms in Fibers P. McDaniel (UDel), J.M. Deitzel (UDel), J.W. Gillespie Jr. (UDel), K. Strawhecker (ARL), T. Bogetti (ARL), T. Weerasooriya (ARL)
Meso-Mechanical Modeling of Canonical
Perforation Experiments 
Christopher S. Meyer (UD/CCM, ARL), Bazle Z. (Gama) Haque (UD/CCM),
John W. Gillespie, Jr. (UD/CCM), Daniel J. O’Brien (ARL), Bradley D. Lawrence (ARL), Jennifer M. Sietins (ARL), Enoch Bonyi (MSU), Kadir Aslan (MSU)
Transverse Impact of Fibers and Yarns Subramani Sockalingam (USC), Sanjib Chowdhury (UDel), John W. Gillespie Jr. (UDel), Travis Bogetti (ARL), Tusit Weerasooriya (ARL), Daniel Casem (ARL)
High Strain Rate Fiber-Matrix Interfacial Traction Laws Sandeep Tamrakar (UDel), Subramani Sockalingam (USC), Sanjib Chowdhury (UDel), B.Z. Haque (UDel), John W. Gillespie Jr. (UDel), Raja Ganesh (UDel),
Weinong Chen (Purdue), Giuseppe Palmese (Drexel),
Somnath Ghosh (JHU), Daniel J. O’Brien (ARL)
Modeling the Fibrillated Microstructure of UHMWPE Fibers Jeffrey Staniszewski (SURVICE), Travis Bogetti (ARL), Jan Andzelm (ARL),
In-Chul Yeh (ARL), Ken Strawhecker (ARL), Stephen Recchia (ARDEC),
John Gillespie III (UDel), Preston McDaniel (UDel),
Subramani Sockalingam (USC), Sanjib Chowdhury (UDel)
High Rate Test Methods for Fiber-Matrix Interface Sandeep Tamrakar (UDel), Subramani Sockalingam (USC), Sanjib Chowdhury (UDel), B.Z. Haque (UDel), John W. Gillespie Jr. (UDel), Weinong Chen (Purdue),
Giuseppe Palmese (Drexel)
Synthesis and Characterization of Tows with
Controlled Resin Distribution 
Suresh G. Advani (UDel), Shridhar Yarlagadda (UDel), Michael Yeager (UDel)

 

2015 Research Posters

Poster Title Authors
Composites Overarching
(Composites Collaborative Materials Research Group)
J. Gillespie, Jr., University of Delaware; D. O’Brien, Army Research Laboratory
Composite Damage Under Dynamic Impact Z. Li, X. Zhang, and S. Ghosh (JHU); C. Meyer, J, Yu and D. O’Brien (ARL);
E. Bonyi and K. Aslan (MSU); B. Haque and J. Gillespie, Jr. (UDel)
Relating Meso/Nano-Scale Structure to Mechanical Properties and Failure Mechanisms in Fiber P. McDaniel, J. Deitzel, and J. Gillespie, Jr. (UDel);
T. Bogetti, K. Strawhecker and T. Weerasooriya (ARL)
Experimental Techniques for Composite Interphases Sandeep Tamrakar, Subramani Sockalingam, Bazle Haque, Jack Gillespie, Jr. (UDel); Matthew Hudspeth, and Weinong Chen (Purdue); Giuseppe Palmese (Drexel),
Danny O’Brien (Army Research Laboratory), Somnath Ghosh (JHU)
Molecular Design of Composite Constituents Cameron Abrams, and Giuseppe Palmese (Drexel); Sanjib Chowdhury, Bazle Haque, and Jack Gillespie, Jr.(UDel); Tim Sirk, Jan Andzelm, Robert Elder, Tanya Chantawansri, Joe Lenhart, Danny O’Brien (Army Research Laboratory)

302-831-8149 • info-ccm@udel.edu