Center for Composite Materials - University of Delaware

2015 Publications

Cender, T, A., P. Simacek, and S. G. Advani, “A Method to Determine Open Pore Volume with Pulse Decay,” Applied Physics Letters, 105, 134101 (2014),
Bhargava, S., M. Kubota, R. D. Lewis, S. G. Advani, A. K. Prasad, and J. M. Deitzel, “Ultraviolet, Water, and Thermal Aging Studies of a Waterborne Polyurethane Elastomer-based High Reflectivity Coating,” Progress in Organic Coatings, 79, pp. 75-82, February 2015.
Chowdhury, S. C., G. R. Swenson, B. Z. (Gama) Haque, and J. W. Gillespie, Jr., “Molecular Dynamics Simulations of Single-Walled Carbon Nanotube Bundle under Mechanical Loading,” FEATURE ARTICLE. SAMPE Journal, 51 (3), May/June 2015.
Gallo, G. J., E. T. Thostenson, “Electrical Characterization and Modeling of Carbon Nanotube and Carbon Fiber Self-sensing Composites for Enhanced Sensing of Microcracks,” Materials Today Communications 3, pp. 17-26, 2015.
(Gama) Haque, B. Z., and J. W. Gillespie Jr., “Penetration and Perforation of Composite Structure”, Mechanical Engineering Research Journal, Dept. of Mech. Eng. CUET (ISSN:1990- 5491). 9, pp. 37-42, 2013. Published Online March 2015.,%202013,%20page%2037-42.pdf
Gao, X., J. W., Gillespie, Jr., R. E. Jensen, W. Li, B. Z. (Gama) Haque, S. H. McKnight, “Effect of Fiber Surface Texture on the Mechanical Properties of Glass Fiber Reinforced Epoxy Composite,” Composites:Part A (2015),
Khattra, N. S., M. H. Santare, A. M. Karlsson, T. Schmiedel, F. C. Busby, “Effect of Water Transport on Swelling and Stresses in PFSA Membranes,” Fuel Cells, 15, pp.178- 188, 2015.
Kelly, G. S., S. G. Advani, J. W. Gillespie, Jr., “A Model to Describe Stick-Slip Transition Time during Ultrasonic Consolidation,” Int. Journal of Advanced Manufacturing Technology,
Yeager, M. and S. G. Advani, “Numerical Model of Fiber Wetting with Finite Resin Volume,” Integrating Materials and Manufacturing Innovation, 4 (3), March 2015.
Zhang, D., D. Heider, and J. W. Gillespie, Jr., “Determination of Void Statistics and Statistical Representative Volume Elements (SRVE) in Carbon Fiber Reinforced Thermoplastic Prepregs,” Journal of Thermoplastic Composite Materials, 2015.
Zhang, D., D. Heider, and J. W. Gillespie, Jr., “Determination of Void Statistics and Statistical Representative Volume Elements (SRVE) in Carbon Fiber Reinforced Thermoplastic Prepregs,” Journal of Thermoplastic Composite Materials, 2015.
Tamrakar, S., Q. An, E. T. Thostenson, A. Rider, B. Z. Haque, and J. W. Gillespie, Jr., “Tailoring Interfacial Properties by Controlling Carbon Nanotube Coating Thickness on Glass Fibers using Electrophoretic Deposition,” American Chemical Society Applied Materials & Interfaces, 8 (2) pp. 1501-1510, December 2015.
McDaniel, P. B., J. M. Deitzel, and J. W. Gillespie, Jr., “Structural Hierarchy and Surface Morphology of Highly Drawn Ultra High Molecular Weight Polyethylene Fibers Studied by Atomic Force Microscopy and Wide Angle X-Ray Diffraction,” Journal of Polymer Research, 69, pp. 148 – 158, 2015.
Obaid, A., D. Heider, J. W. Gillespie, Jr., “Investigation of Electro-Mechanical Behavior of Carbon Nanotube Yarns during Tensile Loading,” Carbon, 93, pp731 – 741, November 2015.
Haque, B. Z. (Gama) and J. W. Gillespie, Jr., “A New Penetration Equation for Ballistic Limit Analysis,” Journal of Thermoplastic Composite Materials, 28.7 (2015): 950-972,
Kubota, M., Prasad, A. K., Deitzel, J. M., Teather, E. W., & Advani, S. G. (2015). "Thin polymeric film microstructure manipulation for diffused reflectance applications" Polymer Engineering & Science, 55(12), 2878-2883.
Sockalingam, S., J. W. Gillespie, Jr., and M. Keefe, “Dynamic Modeling of Kevlar KM2 Single Fiber Subjected to Transverse Impact,” International Journal of Solids and Structures, 67-68, pp. 297 – 310, August 2015.
Yu, H., D. Heider, S. G. Advani, “A 3D microstructure based resistor network model for the electrical resistivity of unidirectional carbon composites,” Composite Structures, v. 134, p. 740-749, 2015,
Rider, A.N. E. Yeo, J. Gopalakrishna, E.T. Thostenson, N. Brack. “Hierarchical composites with high-volume fractions of carbon nanotubes: Influence of plasma surface treatment and thermoplastic nanophase-modified epoxy”, Carbon 94 (2015): 971-981,
Gallo, G. J., and E. T. Thostenson. “Spatial damage detection in electrically anisotropic fiber-reinforced composites using carbon nanotube networks.” Composite Structures (2015).
Dai, H., E. T. Thostenson, and T. Schumacher. “Processing and Characterization of a Novel Distributed Strain Sensor Using Carbon Nanotube-Based Nonwoven Composites.” Sensors 15.7 (2015): 17728-17747.
Quan, Z., A. Wu, M. Keefe, X. Qin, J. Yu, J. Suhr, J.H. Byun, B.S. Kim, and T.W. Chou. “Additive manufacturing of multi-directional preforms for composites: opportunities and challenges.” Materials Today 18, no. 9 (2015): 503-512.
Mäder, E., Liu, J. W., Hiller, J., Lu, W., Li, Q., Zhandarov, S., & Chou, T. W. (2015). "Coating of carbon nanotube fibers: variation of tensile properties, failure behavior and adhesion strength" Frontiers in Materials, 2, 53.
Yu, J., Wang, L., Lai, X., Pei, S., Zhuang, Z., Meng, L., Huang, Y., Li, Q., Lu, W., Byun, J.H. and Oh, Y., Yan. Y., Chou, T.W., 2015. "A durability study of carbon nanotube fiber based stretchable electronic devices under cyclic deformation." Carbon,94, pp.352-361.
Meng, F. C., Lu, W. B., Li, Q. W., Byun, J. H., Oh, Y., & Chou, T. W. (2015). "Graphene-based fibers: a review. Advanced Materials", 27(35), 5113-5131.
Deitzel, J., P. McDaniel, and J. W. Gillespie, Jr., Chapter 10: High Performance Polyethylene Fibers. In Structure and Properties of High- Performance Fibers; Bhat, G., Ed; Elsevier, November 2015.

302-831-8149 • | © 2017 University of Delaware