Center for Composite Materials - University of Delaware

2011 Publications List

Lim, A. S., S. L. Lopatnikov, N. J. Wagner, and J. W. Gillespie, Jr., “An Experimental Investigation into the Kinematics of a Concentrated Hard-Sphere Colloidal Suspension during Hopkinson Bar Evaluation at High Stresses,” Journal of Non-Newtonian Fluid Mechanics, http://dx.doi.org/10.1016/j.jnnfm.2010.06.015, 165, pp. 1342-1350, 2010.
Yoon, M. K., D. Heider, and J. W. Gillespie, Jr., “Local Damage Detection with the Global Fitting Method using Operating Deflection Shape Data,” Journal of Nondestructive Evaluation, 29 (1), pp. 23-37, March 2010.
Alfredsson, K. S., A. A. Gawandi, J. W. Gillespie, Jr., L. A. Carlsson, and R. A. Bogetti, “Stress Analysis of Axially and Thermally Loaded Discontinuous Tile Core Sandwich With and Without Adhesive Filled Core Gaps,” Composite Structureshttp://dx.doi.org/10.1016/j.compstruct.2011.01.015
Gawandi, A., E. T. Thostenson, and J. W. Gillespie, Jr., “Tow Pullout Behavior of Polymer-Coated Kevlar Fabric,” Journal of Materials Science, Volume 46, Number 1, 77-89,  DOI: 10.1007/s10853-010-4819-
Nilakantan, G., a. Abu-Obaid, M. Keefe, and J. W. Gillespie, Jr., “Experimental Evaluation and Statistical Characterization of the Strength and Strain Energy Density Distribution of Kevlar KM2 Yarns: Exploring Length Scale and Weaving Effects,” Journal of Composite Materials, November 8, 2010, http://dx.doi.org/10.1177/0021998310387667
Manzella, A. F., B. A. Gama, and J. W. Gillespie, Jr., “Effect of Punch and Specimen Dimensions on the Confined Compression Behavior of S-2 Glass/Epoxy Composites,” Composite Structures, February 20, http://dx.doi.org/10.1016/j.compstruct.2010.11.006
Gama, B. A. and J. W. Gillespie, Jr., “Finite Element Modeling of Impact, Damage Evolution and Penetration of Thick-Section Composites,” International Journal of Impact Engineering, submitted October 2009, http://dx.doi.org/10.1016/j.ijimpeng.2010.11.001
Abu Obaid, A., J. M. Deitzel, J. W. Gillespie, Jr. and J. Q. Zheng, “The Effects of Environmental Conditioning on Tensile Properties of High Performance Aramid Fibers at Near-Ambient Temperatures,” Journal of Composite Materials, July 2010, http://dx.doi.org/10.1177/0021998310381436
Yoon, M. K., D. Heider, and J. W. Gillespie, Jr., “Local Damage Detection with the Global Fitting Method using Operating Deflection Shape Data,” Journal of Nondestructive Evaluation, 29 (1), pp. 23-37, March 2010.
Lopatnikov, S. and J. W. Gillespie, Jr., “Poroelasticity – I: Governing Equations of the Mechanics of Fluid-Saturated Porous Materials,” Transport in Porous Mediahttp://dx.doi.org/10.1007/s11242-009-9515-x, January 28, 2010.
Koellhoffer, S., J. W. Gillespie., Jr., Travis A. Bogetti, and S. G. Advani, “Role of Friction in the Thermal Development in Ultrasonically Consolidated Aluminum Foils and Composites,” Journal of Materials Processing Technology,  http://dx.doi.org/10.1016/j.jmatprotec.2011.06.011, 2011
Nilakantan, G., M. Keefe, E. D. Wetzel, T. A. Bogetti, and J. W. Gillespie, Jr., “Computational Modeling of the Probabilistic Impact Response of Flexible Fabrics,” Composite Structureshttp://dx.doi.org/10.1016/j.compstruct.2011.06.013, 2011.
Weidner, K., J. W. Gillespie, Jr., and N. Shevchenko, “Performance of Bolted Joints in Discontinuous Ceramic Cored Sandwich Structures – Static Experimental Testing,” Composite Structures, http://dx.doi.org/10.1016/j.compstruct.2011.06.012, 2011.
Nilakantan, G., M. Keefe, E. D. Wetzel, T. A. Bogetti, J. W. Gillespie, Jr., “Computational Modeling of the Probabilistic Impact Response of Flexible Fabrics,Composite Structures, 93, pp. 3163-3174, 2011.
Nilakantan, G., A. Abu Obaid, M. Keefe and J. W. Gillespie, Jr., “Experimental evaluation and statistical characterization of the strength and strain energy density distribution of Kevlar KM2 yarns: exploring length-scale and weaving effects,Journal of Composite Materials, 2011 45: 1749 originally published online 8 November 2010
Koellhoffer, S., J. W. Gillespie, Jr., S. G. Advani, and T. A. Bogetti, “Role of friction on the thermal development in ultrasonically consolidated aluminum foils and composites,” Journal of Materials Processing Technologyhttp://dx.doi.org/10.1016/j.jmatprotec.2011.06.011, 211 (11), pp. 1864-1877, 2011
Okonkwo, J., P. Simacek, S. G. Advani, and R. S. Parnas, “Characterization of 3D fiber preform permeability tensor in radial flow using an inverse algorithm based on sensors and simulation’,” Composites Part A – Applied Science and Manufacturinghttp://dx.doi.org/10.1016/j.compositesa.2011.05.010, 42 (10), pp. 1283-1292, 2011.
Ryol, H. W., S. G. Advani, and S. Walsh, “Direct simulations of particle deposition and filtration in dual-scale porous media,” Composites Part A – Applied Science and Manufacturinghttp://dx.doi.org/10.1016/j.compositesa.2011.05.017, 42 (10), pp. 1344-1352, 2011.
Palanichamy, K., S. G. Advani, and A. K. Prasad, “Synthesis and evaluation of polythiocyanogen (SCN)x as a rechargeable lithium-ion battery electrode material,” Journal of Power Sources, http://dx.doi.org/10.1016/j.jpowsour.2011.04.048, 196 (18) Special Issue: SI, pp. 7755-7759, 2011.
Chandrasekaran, V. C. S., S. G. Advani, and M. H. Santare, “Influence of resin properties on interlaminar shear strength of glass/epoxy/MWNT hybrid composites,” Composites Part A – Applied Science and Manufacturing, http://dx.doi.org/10.1016/j.compositesa.2011.04.004, 42 (8), pp. 1007-1016, 2011.
Giuliano, M. R., S. G. Advani, and A. K. Prasad, “Thermal analysis and management of lithium–titanate batteries,” Journal of Power Sourceshttp://dx.doi.org/10.1016/j.jpowsour.2011.03.099, 196 (15), pp. 6517-6524, 2011
Steggall-Murphy, C., P. Simacek, S. G. Advani, A. Barthelemy, S. Yarlagadda, and S. Walsh, “A model for particle deposition during impregnation of fibrous porous media,” Journal of Porous Media, 14 (5), pp. 383-394, 2011. http://dx.doi.org/10.1615/JPorMedia.v14.i5.20
Wool, R. P., J. F. Stanzione, M. Zhan, E. Senoz, and Q. Dan, “Biobased polymers and composites”, J. Non Cryst Solids, 357(2): 311-319 (2011)
Alms, J. B., S. G. Advani, and J. L. Glancey, “Liquid composite molding control methodologies using vacuum induced preform relaxation,” Composites Part A -Applied Science and Manufacturing, http://dx.doi.org/10.1016/j.compositesa.2010.10.002, 42 (1), pp. 57-65, 2011.
Gao, X., R. E. Jensen, S. H. McKnight, and J. W. Gillespie, Jr., “Effect of colloidal silica on the strength and energy absorption of glass fiber/epoxy interphases,” Composites: Part A, 42, pp. 1728-1747, 2011. 10.1016 https://doi.org/10.1016/j.compositesa.2011.07.029
Lopatnikov, S. L. and J. W. Gillespie, “Poroelasticity-II: On the equilibrium state of the fluid-filled penetrable poroelastic body,” Transport in Porous Media, http://dx.doi.org/10.1007/s11242-011-9781-2, 89 (3), pp. 475-486, 2011.
Nilakantan, G., M. Keefe, E. D. Wetzel, T. A. Bogetti, J. W. Gillespie, Jr., “Computational modeling of the probabilistic impact response of flexible fabrics,” Composite Structures, 93, pp. 3163-3174, 2011. http://dx.doi.org/10.1016/j.compstruct.2011.06.013
Nilakantan, G., A. Abu Obaid, M. Keefe, and J. W. Gillespie, Jr., “Experimental evaluation and statistical characterization of the strength and strain density distribution of kevlar KM2 yarns: Exploring length-scale and weaving effects,” Journal of Composite Materials, http://dx.doi.org/10.1177/0021998310387667, 45 (17) pp. 1749-1769, 2011

302-831-8149 • info-ccm@udel.edu | © 2017 University of Delaware
Legal Notices | Accessibility