|
|
Recent Publications
Tasdemirci, A. and I. W. Hall, “Experimental and Modeling Studies of Stress Wave Propagation
in Multilayer Composite Materials: Low Modulus Interlayer Effects,” Journal of Composite
Materials, 39, pp. 981-1005, 2005.
Cui, S., A. Mohan, and D. S. Weile , “Pareto Optimal Design of Absorbers Using a Parallel
Elitist Nondominated Sorting Genetic Algorithm and the Finite Element –Boundary Integral Method,”
IEEE Transactions on Antennas and Propagation, 53 (6), pp. 2099-2107, June, 2005.
Xiao, J. R., B. A. Gama, J. W. Gillespie, Jr., and E. J. Kansa, “Meshless
Solutions of 2D Contact Problems by Subdomain Variational Inequality and MLPG
Method with Radial Basis Functions,” Engineering Analysis with Boundary
Element , 29 (2), pp. 95-106, 2005.
McCarthy, M. A., J. R. Xiao, N. Petrinic, A. Kamoulakos, and V. Melito, “ Modelling
Bird Impacts on an Aircraft Wing – Part 1: Material Modelling of the Fiber
Metal Laminate Leading Edge Material with Continuum Damage Mechanics, International
Journal of Crashworthiness , 10 (1) pp. 41-49, 2005.
McCarthy, M. A., J. R. Xiao, C. T. McCarthy, A. Kamoulakos, J. Ramos, J. P.
Gallard, and V. Melito, “Modelling Bird Impacts on an Aircraft Wing – Part
2: Modelling the Impact with an SPH Bird Model, International Journal of
Crashworthiness , 10 (1), pp. 51-59, 2005. Yoon M. K., D. Heider, J. W. Gillespie, Jr., C. P. Ratcliffe, and R. M. Crane, "Local
Damage Detection Using The Two-Dimensional Gapped Smoothing Method," Journal
of Sound and Vibration, 279, (1-2), pp.119-139, January 2005.
Gama, B. A.,S. Mahdi, C. Cichanowski, S. Yarlagadda, and J. W. Gillespie,
Jr., "Static
and Dynamic Strength of Scarf-Repaired Thick-Section Composite Plates," Joining
and Repair of Composite Structures, ASTM STP 1455, pp 95-109, K. T. Kedward
and H. Kim, Eds., ASTM International, West Conshohocken, PA, 2005.
Xiao, J. R., B. A. Gama, J. W. Gillespie, Jr., "An Analytical Molecular
Structural Mechanics Model for the Mechanical Properties of Carbon Nanotubes," International
Journal of Solids and Structures, 42(11-12), pp.3075-3092, 2005.
Norton, D. G., and D. G. Vlachos, “Hydrogen Assisted Self-Ignition of Propane/Air
Mixtures in Catalytic Microburners,” Proc. Combust. Inst.. , 30 ,
pp. 2473-2480, 2005.
La Scala, J., and R. P. Wool, “Rheology of Chemically Modified Triglycerides,” Journal
of Applied Polymer Science, 95 (3), pp. 774-783,
February 2005.
Wool, R. P., “Rigidity Percolation Model of Polymer Fracture,” Journal
of Polymer Science Part B-Polymer Physics, 43 (2),
pp.168-183, January 2005.
Duan, Y., M. Keefe, T. A. Bogetti, and B. A. Cheeseman, “Modeling Friction
Effects on the Ballistic Impact Behavior of a Single-Ply High-Strength Fabric,” International
Journal of Impact Engineering, 31 (8), pp. 996-1012,
September 2005.
Duan, Y., M. Keefe, T. A. Bogetti, and B. A. Cheeseman, “Modeling the Role
of Friction During Ballistic Impact of a High-Strength Plain-Weave Fabric,” Composite
Structures, 68 (3), pp. 331-337, May 2005.
Xiao, J. R .and J. W. Gillespie, Jr., “Nanomechanics of Single-Walled Carbon Nanotubes as
Composite Reinforcement,” Symposium of Polymer Nanocomposites 2005, Montreal, Quebec,
Canada, September 28-30, 2005.
Huang, X., M. E. Foley, J. W. Gillespie, Jr., and T. A. Bogetti, "Mechanics of the Fiber-Matrix
Interphase Push-Out Test," Proceedings of the 20th Annual Technical Conference American Society
for Composites, Philadelphia, PA, September 7-9, 2005.
Zhang, Y., S. Scholz, S. Amouroux, J. W. Gillespie, Jr., and D. Heider, “Measurement of Transverse
Permeability Using Gaseous and Liquid Flow,” Proceedings of the 20 th Annual Technical Conference
American Society for Composites, Philadelphia, PA, September 7-9, 2005.
Gama, B. A., and J. W. Gillespie, Jr., “A Quasi-Static Penetration Model of Ballistic Penetration
of Thick-Section Composites,” Proceedings of the 20 th Annual Technical Conference American
Society for Composites, Philadelphia, PA, September 7-9, 2005.
Xiao, J. R., S. L. Lopatnikov, B. A. Gama, and J. W. Gillespie, Jr., “Nanomechanics on the
Deformation of Single- and Multi-Walled Carbon Nanotubes under External Radial Pressure,”
Proceedings of the 20 th Annual Technical Conference American Society for Composites,
Philadelphia, PA, September 7-9, 2005.
Vinson, J. R., “Sandwich Structures: Past, Present and Future,” Invited plenary speech at the
Seventh International Conference on Sandwich Structures, Sandwich Structures 7: Advancing with
Sandwich Structures and Materials, University of Aalborg, Denmark, O. T. Thomsen,
E. Bozhevolnaya and A. Lyckegaard; Editors, Springer, Dordrecht, The Netherlands, pp. 3-12,
August 29-31, 2005
Andersen, S. M., and J. W. Gillespie, Jr., “Accelerated Insertion of Lightweight
Materials into Military Vehicles,” Presented at the 3 rd Annual Lightweight
Materials for Defense , Arlington , Feb 28 – March 2, 2005 .
Gao, S., R. E. Jensen, and J. W. Gillespie, Jr., "A Study of the Mechanical
Interlocking Effect on Polymer Composite Properties," Proceedings
of the 28th Annual Meeting of Adhesion Society, February 13-16, 2005.
Gama, B. A., S. L. Lopatnikov, and J. W. Gillespie, Jr., "Recent Advancements
Split Hopkinson Pressure Bar (SHPB) Technique," 29th International
Conference on Advance Ceramics and Composites, Cocoa Beach, FL, January
23-28, 2005.
Chou, T-W., Microstructural Design of Fiber Composites ,
D. R. Clarke, S. Suresh, and I. M. Ward, Series Editors, Cambridge Solid State Science Series, Cambridge University Press, reprinted in paperback, September 15, 2005.
Wool, R. P., and X. S. Sun, Bio-Based Polymers and Composites, Elsevier, Academic Press, 2005 Vinson, J. R., Plate and Panel Structures of Isotropic,
Composite and Piezoelectric Materials, including Sandwich Construction, published
by Springer, Dordrecht , The Netherlands, 2005.
Norton, D. G., S. R. Deshmukh, E. D. Wetzel, and D. G. Vlachos, “Downsizing Chemical Processes
for Portable Hydrogen Production,” Microreactor Technology and Process Intensification, Y. Wang and J. D. Holladay; Editors, ACS Symposium Series 914, Washington, DC, pp. 179-193, 2005.
Advani, S. G., and K-T. Hsiao, “Transport Phenomena in Liquid Composites Molding
Processes and Their Roles in Process Control and Optimization,” Chapter 14
in Handbook of Porous Media , Edited by Dr. Kambiz Vafai, Published by Marcel
Dekker, Inc., 270 Madison Ave., NY, NY 10016, 2005.
Gokce, A., and S. G. Advani, “Modeling, Optimization and Control of Resin
Flow During Manufacturing of Textile Composites with Liquid Molding,” Design
and Manufacture of Textile Composites, Edited by Andrew Long, Woodhead Publishing
Limited, Cambridge, UK , 2005.
Gerhard, J. K., E. J. Lynam, M. R. Shaffer, S. Yarlagadda, N. B. Shevchenko,
B. K. Fink, D. Heider, J. J. Tierney, J.W. Gillespie Jr., “Apparatus for Induction
Lamination of Electrically Conductive Fiber-Reinforced Thermoplastic,” U. S.
Patent Number 6,881,374 , issued April 19, 2005.
|