Pg	Project Title		Authors
98	Rapid Prototyping of Complex-Curved Molds		Cerniaskas, T., Dominauskas, A., Heider, D.
99	Investigation of VARTM Processing Parameters for Glass/PBT		Chatterjee, A.,Ziaee, S., Gillespie, J.W, Dweib, M. Mallon, P..
101	The Effect of Bundle Size on Tow Impregnation in Liquid Molding Composites		Foley, M.A., Gillespie, J.W., Bogetti, T. (ARL), McKnight, S.H. (ARL)
103	Control of Thickness and Property Variations During VARTM Processes		Li, H., Roche, M., Gama, B., Heider, D., Gillespie, J.W.
105	Cure Cycle Optimization of Room Temperature VARTM Processed Epoxy Composites		Chatterjee, A., Heider, D., Gillespie, J.W.
107	Rapid Automated Induction Lamination of Carbon/Thermoplastics		Yarlagadda, S., Heider, D., Gillespie, J.W., Tierney, J., Shevchenko, N., Fink, B.K. (ARL)
109	Design Methodologies For Intelligent Flow Control Strategies In Liquid Composite Molding		Hsiao, K.T., Advani, S.
111	Numerical Computation of the Fiber Preform Permeability Tensor by the Homogenization Method and Lattice-Boltzmann Method		Nedanov, P., Advani, S.
112	Preform Deformation and Permeability Modeling		Simacek, P., Advani, S.
113	Liquid Injection Molding Simulation (LIMS)		Simacek, P., Advani, S.
114	LIMS Simulation Package		Simacek, P., Broszat, K., Neumann, J.F., Behrens, M., Advani, S.
115	LIMS User Interface		Simcek, P., Broszat, K., Neumann, J.F., Behrens, M., Advani, S.
116	Modeling Vacuum Assisted Resin Transfer Molding with the Liquid Injection Molding Simulation (LIMS) Software		Correia, N., Advani, S., Simacek, P., and Rudd, C.D., Long, A.C., and Robitaille, F. (University of Nottingham)
117	Numerical Simulation of Compaction and Saturation Effects in Vacuum Assisted Resin Transfer Molding		Acheson, J., Advani, S., Simacek, P., Gillespie, J.W.
118	Numerical Accuracy and Convergence while Modeling Injection Gate for 3-D RTM Mold Filling Simulations		Modi, D., Simacek P., Advani, S.
119	Permeability Characterization of a Unit Cell in Tackified Preforms Using Microscopic Analysis		Vieux-Pernon, C., Advani, S.
120	Experimental and Model Validation of Effective Permeability in VARTM Process		Maniwczak, S, Li, W., Heider, D., Gillespie, J.W.
121	PERMSTAT - Automated Permeability Measurement Station		Belloli, A., Schaer, N., Advani, S., Heider, D., Ermanni, P. (ETHZ)
122	Fiber Preform Permeability Measurement Station for VARTM Process		Belloli, A., Advani, S., Heider, D.
123	Permeability Characterization for RTM Fiber Preforms Using a Permeability Work Cell		Estrada, G., Advani, S.
124	Bulk Permeability Measurement with a Correction for the Presence of Race-Tracking		Lawrence, J., Advani, S.
125	Permeability Measurements and Flow Front Sensing with the Aid of Lineal Sensors		Erninger, M., Advani, S.
126	Development of the Rapid Automated Induction Lamination (RAIL) Process for Carbon Thermoplastic Composites Laminates Using a Model Based Predictive Approach		Tierney, J., Gillespie, J.W.
127	A Study on the Induction Heating of Conductive Fiber Reinforced Composites		Kim, H.,Yarlagadda, S., Gillespie, J.W., Fink, B.K. (ARL)
128	Numerical Models For Induction-Based Heating Of Conductive Fiber Reinforced Composites		Kim, H., Yarlagadda, S., Gillespie, J.W., Fink, B.K. (ARL)
129	Induction-Based Lamination of Carbon Fiber Reinforced Thermoplastics		Bengtsson, P., Yarlagadda, S., Shevchenko, N.
130	Unidirectional Lamination of Carbon/Thermoplastics		Yarlagadda, S., Tierney, J., Gillespie, J.W., Shevchenko, N., Fink, B. (ARL)
131	Investigation of the Fast Remotely Actuated Channeling (FASTRAC) Process: A Unique Filling Time Master Curve		Markecevic, B., Mathur, R., Advani, S., Heider, D., Walsh, S. (ARL)
132	Spatially Uniform Curing During Resin Transfer Molding		Comas-Cardona, S., Advani, S., Ziaee, S.
133	Polymerization and VARTM Processing of Thermoplastic Materials at Elevated Temperature		Dweib, M., Mallon, P, Gillespie, J.W.
134	Delay Line Automation of Sequential Injection		Roche, M., Li, H.Y., Heider, D., Gama, B., Gillespie, J.W., Ausius, G. (IUP Lorient)
135	Automated Tow Placement For Low Cost Rapid Prototyping of Ceramic Matrix Composites		Yarlagadda, S., Gillespie, J.W., and Vaidyanathan, V., Rigali, M. (Advanced Ceramics Research)
136	Low-Cost Composite Tooling Concepts		Yarlagadda, S., Gillespie, J.W., and Vaidyanathan, V, Lombardi, J.,and Artz, G. (Advanced Ceramics Research)
137	Optimal Design of Robust Injection Systems for LCM Processes		Gokce, A., Advani, S.
138	Influence of Vacuum Debulking on Dimensional Tolerances During VARTM Processing		Li, W., Heider, D., Gillespie, J.W.
139	Low-Cost Manufacturing of Large-Scale Hydrodynamic Surfaces		Engel, K., Li, W., Heider, D., Gillespie, J.W.