 |
 |
| Pg
|
Project
Title |
|
Authors |
 |
| 187 |
2D
Distributed Sensing via Time Domain Reflectometry (TDR) |
|
A.
Dominauskas, D. Heider, and J. W. Gillespie, Jr.
|
| 189
|
A
Time Domain Reflectometry (TDR) Based Method for Measuring Mode I Fracture
Toughness of Polymer Composites
|
|
A.
Abu-Obaid (PD), L. Ren, S. Yarlagadda, and N. Hager (MSI).
|
| 191 |
Data
Mining of Process Information for Vacuum-Assisted ResinTransfer Molding
(VARTM) |
|
P.
Natarajan (MSECE) and D. Heider |
| 193 |
Design
and Optimization of Magnetostrictive Strain Sensor |
|
P.
Tayalia (MSMSE), J. W. Gillespie Jr. and D. Heider |
| 195 |
Measurement
of Strain and Strain Gradients with Fiber Bragg Grating Sensors |
|
K.
Epping (Intern), Z. Yu , D. Heider, E. Udd (Blue Road Research) and G. Ziegmann
(Technical University of Clausthal, Germany) |
| 197
|
Simulation-Based
Liquid Injection Control (SLIC): Features and Applications in RTM and VARTM |
|
K.-T.
Hsiao and S. G. Advani |
| 199 |
TDR-Line
Sensors for Multifunctional Process Sensing |
|
A.
Dominauskas, D. Heider, and J. W. Gillespie Jr. |
| 201 |
Design
and Fabrication of Sensors on Fibers |
|
R.
Sirdeshmukh (MSECE), B. Panchapakesan, A. Abu Obaid (PD), and D. Heider
|
| 202 |
Highly
Sensitive Magnetostrictive Cure Monitoring (MCM) Sensor |
|
T.
Roida (Intern), A. Dominauskas, and D. Heider |
| 203 |
Intelligent
Resin Transfer Molding using the RTM Workstation |
|
P.
G. Friede (Intern), J. M. Lawrence (PhDME), and S. G. Advani |
| 204 |
Internal
Strain Measurement of Composite Materials with a Novel Magnetic Wire Sensor |
|
Z.
Yu, D. Heider, W. J. Biter (Sensortex), S. M. Hess . (Sensortex), and S.
Oh (Sensortex) |
| 205 |
LIMS
User Interface (LIMSUI) |
|
B.
Lenhard (Intern), M. Schlieker (Intern), P. Simacek, and S. G. Advani |
| 206 |
New
Control Approaches During VARTM |
|
B.
Lelievre (Intern) and J. Glancey |
| 207 |
Numerical
Issues in LIMS and Applications |
|
D.
Modi (MSME) and S. G. Advani |
| 208 |
On
the Physics of Liquid-Crystal Based Sensors |
|
S.
Lopatnikov, J.W.Gillespie, Jr., and E. Wetzel (ARL) |
| 209 |
Optimization
of Flow Distribution Network in VARTM by Using SLIC (Simulation-Based Liquid
Injection Control) |
|
D.
Coatleven (Intern), K. T. Hsiao, and S. G. Advani |
| 210 |
Simultaneous
Gate and Vent Location Optimization in Liquid Composite Molding Processes |
|
A.
Gokce (PhDME) and S. G. Advani |
| 211 |
Smart
Line Injection to Control Flow in VARTM |
|
A.
R. Nalla (MSME) and J. L. Glancey |
| 212 |
Use
of SLIC for Design of Distribution Media Lay-Up in VARTM |
|
M.
Devillard (MSME), K. T. Hsiao, and S. G. Advani |
| 213 |
Vibration
NDI of a Large-Scale Navy Structure with Multiple MEMS Accelerometers |
|
M.
K. Yoon, D. Heider, J. W. Gillespie Jr., C. Ratcliffe (Naval |
| 214 |
Characterization
of Metal Matrix Composites |
|
C.
Herbein (BSME), I. W. Hall, A. Paesano, T. A. Bogetti (ARL),and A. Yiournas
(ARL) |
