Pg	Project Title		Authors
156	Comparison of Different Distribution Media with VARTM Process on the Flow Visulaization Workstation		G. Denis (Intern) and S. G. Advani
157	Hysteresis Bonding of Thermoplastic Composite Using Nickel/Polysulfone Adhesive Films		W. Suwanwatana (PhDMSE), S. Yarlagadda, and J. W. Gillespie, Jr.
159	Improvement of Surface Quality during VARTM Processing		W. Li (PD), D. Heider, and J. W. Gillespie, Jr.
161	Modular Methodology for Sensing and Control in Resin Transfer Molding		J. M. Lawrence (PhDME), M. Devillard (MSME), and S. G. Advani
163	Process and Performance Evaluation of the VAP Process		W. Li (PD), D. Heider, J. W. Gillespie, Jr., M. Endrulat (W.L. Gore & Associates, GmbH, Germany), K. Hochrein (W.L. Gore & Associates, GmbH, Germany), M.G. Dunham (W.L. Gore & Associates, Newark, DE) and C.J. Dubois (W.L. Gore & Associates, Newark, DE)
165	Repeatability of the VARTM Process in Order to Achieve Aeronautics Requirements		S. Amouroux (PhDMSE), J. W. Gillespie, Jr., and D. Heider
167	Surface Modification for Improving Composite Impact Performance		X. Gao (PhDMSE), J. W. Gillespie, Jr., and R. E. Jensen (ARL)
169	Through-Thickness Heating of Layered Stack of Carbon Reinforced Prepregs		H. J. Kim, S. Yarlagadda, and J. W. Gillespie, Jr.
171	In Situ Formation of Barrier Layer for CIRTM Processing		A. Harkare (MSME) and D. Heider
173	Analytical Model for Vacuum Infusion Process		S. Lopatnikov, P. Simacek, J. W. Gillespie, Jr., and S. G. Advani
174	Crystallization Kinetics Behavior of PEEK-Based Composites Exposed to High Heating and Cooling Rates		J. Tierney and J. W. Gillespie, Jr.
175	Experimental Investigation of Dispersion during Flow of Multi-Walled Carbon Nanotube/Polymer Suspension in Fibrous Porous Media		Z. Fan (PhDME), K. T. Hsiao, and S. G. Advani
176	High-Pressure Process for Foaming Soybean-Oil Polymers		L. M. Bonnaillie (PhDChE) and R. P. Wool
177	Melt Processing of MWNT/HDPE Composite Films		W. Tang (PhDME) and S. G. Advani
178	Mold Fabrication for Composite Parts		N. B. Shevchenko, C. Krauthauser, and S. M. Andersen
179	On-Line Mixing Studies of Resin and Curing Agents for Liquid Transfer Molding		A. Cotard (Intern) and S. G. Advani
180	Review of Process and Mechanical Property Data of VARTM Panels Fabricated with the Intelligent Process Control (IPC) System		H. Deffor, D. Heider, and J. W. Gillespie, Jr.
181	Strength Improvement of Laminate Object Manufacturing (LOM) Molds		J. Marais (Intern) and A. Dominauskas
182	Tall Structure Infusion via VARTM		S. Delanoe (Intern) and D. Heider
183	TPU Laminate Fabrication Using the Induction Unit and the Lamination Unit		S. Kumar and S. Yarlagadda
184	VARTM at Elevated Temperatures		M. Schuetz (Intern), D. Heider, and J. Schuster (Univ. of Applied Science)
185	Development of Covariance Between the Preform Variation and Flow Pattern Emergence in VARTM		B. Markicevic (PD), D. Heider, S. Walsh (ARL), and S. G. Advani
186	Progress in Flow Simulation in Liquid Composite Molding Using LIMS Program		P. Simacek and S.G. Advani